Shop

Lucas #1015 Acrylic Resin Primer is a polymer emulsion resin intended as a general purpose primer and to saturate and adhere polyester fabrics in the construction of reinforced, fluid-applied elastomeric roof membranes. #1015 is recommended as a bleedblocking primer for Lucas Silicone Roof Coatings. #1015 may be used on EPDM, PVC, Hypalon, concrete, modified bitumen and asphalt BUR roofs. #1015 may also be used as a base coating for conctete and masonry walls when top coated with Lucas #8100 100% Silicone Wall Coating. Its light yellow color changes to a darker amber hue as the coating dries. This allows for visual confirmation of the coatings level of cure and readiness for application of the top coatings.

Application:

Mechanically mix before using. Do not store above 90F. Apply only at temperatures above 40F and rising with less than 90% humidity and no threat of rain for 48 hours. Surfaces must be power washed clean with Lucas #115. The surface may be damp but must be free of standing water. Surface temperatures should be under 100F to avoid premature curing. If roof surface is hot, apply a light water spray to reduce its temperature.

When used with polyester reinforcement, apply with a soft bristle brush, roller or suitable spray equipment at the rate of three gallons per 100 sq. ft. More will be required on alligatored or irregular surfaces. Irregular surfaces may require a prime coat to fill in and level the roof surface. Not recommended for use with polyester fabric on granule surfaced roofs. Two additional coats of Lucas Elastomeric Roof Coating at 1.25 to 1.5 gallons per 100 sq. ft. each is required to achieve a thickness of 20 to 30 mils. The first top coat should be #1000BC which is light gray in color. This speeds dry time and provides the applicator with visual confirmation of proper coverage when applying the bright white top coating of #1000TC. Drying time to second coat @ 70F is 4 to 8 hours.